Reliability focused pumping solutions and repair services for industry since 1974.    Call Today! 215-657-9800

Victor Pumps

Victor PumpSunair Co. is a proud supplier of Victor Pump products, including...

«S» Self-Priming Centrifugal Pumps for liquids with solids

«S» series pumps are horizontal, one-stage, self-priming centrifugal with an open impeller handling large enough to handle solids up to 76 mm (3"). The series provides quick self-priming suction, which does not require a foot valve. The pump primes and re-primes automatically to depths over 7.5 meters (25 ft).

With easily replaceable wear plates, these pumps have a high resistance to abrasion. The impeller can also be easily inspected through a large cover. All pumps are equipped with externally lubricated mechanical seals with hard faces, designed to prevent damage during dry running.

Self-priming centrifugal series pumps are specially designed for pumping clear or dirty, solids-laden liquids.

«S» series pumps are most useful when the the following conditions are required:

  • Quick self-priming
  • Handling large diameter solids
  • High abrasive resistance
  • Dry running
  • Long life


«S» series pumps are most commonly used in industry, waste treatment, environmental protection, shipbuilding, construction, civil engineering and Agriculture applications.

These pumps are supplied in cast iron, stainless steel fitted and all stainless steel as your application requires. 

«R» Positive Displacement Rotary Internal Gear Pumps

«R» series pumps are positive displacement rotary interal gear, featuring a capacity that is directly proportional to the rotation speed and virtually independent of the pressure. The flow is smooth and non-pulsating in either direction. Depending on the application, the pump will be supplied with a packed gland or a mechanical seal mounted single, single with quench, double in tandem, double back-to-back or with a magnetic coupling.

«R» Pumps are used for liquids of any viscosity, such as solvents, chocolate or bitumen. The liquid may be lubricating or non-lubricating and may contain abrasive particles as color pigments.

«R» pumps can be used best in one or more of the following circumstances:

  • Viscous liquids
  • Constant capacity
  • Smooth non-pulsating flow
  • Self-priming
  • Long life


«R» Pumps are used in several industries, including: petrochemical, paint and resin, soap and detergent, food and chocolate, paper.

The «R» Pumps are manufactured in cast iron or stainless steel. Special materials or material combinations can be used when necessary. The Pumps can be equipped with heating jackets and / or by-pass (relief valve).


Learn More About Victor Pumps

Have a question?
Ask it here and get a FAST ANSWER! Or Call 215-657-9800!

Need information on this topic or product? Fill out the quick form below and a representative will get back to you FAST!
*Name 
*Company 
*Phone 
*Email 
*Question 
* Required Field

Sunair Office

  • 2475 Wyandotte Road
    Willow Grove, PA 19090
  • Phone: (215) 657-9800
    Fax: (215) 657-9881
  • Email: Click Here

Tweets from @sunairco

© Copyright Sunair Company. Logos on this page are copyrights of their respective companies. The Sunair logo is a registered trademark of Sunair Co.
Disclaimer | Terms & Conditions | Developed and designed by CMS4i.

We accept: